10 Must-Know Growing Media Facts

There are some common questions or issues growers have concerning their soil. Two experts from Premier Tech Horticulture explain the top ten things you need to know.

1. Use growing media shortly after blending or delivery. Growing media does not go bad, but changes do occur with aged product. Changes include draw-down of certain nutrients (if the blend has a starter nutrient charge), activation of limestone and decreased effectiveness of the wetting agent. For example, wetting agents can be consumed by native microorganisms found in the growing media components and can chemically degrade. Microbes in the growing media can potentially consume the fertilizer charge, especially nitrogen and iron. This may explain why crops planted in aged growing media get off to a slower start. These processes occur more rapidly with hot storage temperatures than with cold.

Product aging begins the day the growing media is manufactured. Most manufacturers print a manufacturing date on the package. If you use packaged growing media, check with the manufacturer for this date. If you mix your own, keep records for the day you mixed it. The best use of a typical packaged peat-based growing media is eight to nine months during the summer months and 10 to 12 months through colder, winter months. Growing media components that have been composted contain a high population of microorganisms that can also consume the wetting agent. Therefore, packaged growing media containing bark and compost have a shorter best-use date of four to six months.

Some additives incorporated into growing media are more critical for the best-use date. Growing media that contain controlled-release fertilizers should be used within one month of the manufacturing date due to the release of fertilizer within the package. Some fungal-based biofungicides have a shelf life of a few months when incorporated into the growing media; however, most bacteria-based biofungicides and mycorrhizae can last more than a year.

The take-home message for aged product is that you may need to modify your cultural practices when planting in an older growing media. The best way of knowing how to use aged product is to send unused samples to a laboratory for testing and discuss recommendations with the media manufacturer.

2. When switching to a new growing media, expect to water differently. The most difficult change to overcome is the water requirements. Select a growing media that has similar watering characteristics to what is currently being used. Having the same appearance when it dries out is also ideal, as many growers use the color of the growing media to determine when to water.  The adjustment is often difficult for the employees who are most familiar with the current growing media.

Other considerations when switching include:

  • Will there be changes required in my fertility program?
  • Will the growing media influence the application rate of plant growth regulator drenches?
  • How will the limestone react and change the pH of the growing media?
  • How will the buffering capacity of the growing media be affected by the limestone?
  • Keep in mind that switching growing media may not always be a solution to a growing problem.

3. Most growing media contains a starter fertilizer charge that is designed to help with initial plant growth. Once in use, it generally lasts about one to two weeks, depending on the rate the manufacturer incorporates, how much water is applied to plants watered (volume divided by frequency) and plant uptake. If you are unsure of the fertilizer content, check with the growing media manufacturer for fertility levels. Some growers prefer to water in with a water-soluble fertilizer immediately after planting with about 100 ppm of nitrogen, while others prefer to wait a few weeks. This is a personal preference. However, if you water in immediately, you should adjust the fertilizer level of the growing media. This will account for any imbalances or loss of nutrients in the growing media as a result of product aging.

4. Peat moss, the major component in most potting soils, is acidic with a pH from 3.5 to 4.5. Limestone is added to neutralize the acidity of peat to raise the pH from 5.5 to 6.2. Limestone is a rock and needs time to break down from the moisture in the growing media. The drier the growing media in storage, the longer this will take. It is not uncommon for a dry, unused growing media less than three months old to have a pH close to 5.0. To get the true starting pH of fresh, unused growing media, take a sample of unused mix, saturate it with deionized water to make a paste and let it sit inside a plastic bag. Take pH readings at day one, day three and day seven to verify the pH rise to the normal range.

One word about pH meters: Not all pH meters work well with porous, soilless growing media. Testing the pH of a growing media by sticking the probe directly in the root ball generally does not produce accurate readings. This is especially true of inexpensive metal probe pH readers. Often they read a pH near 7.0 because there is not enough moisture contact to get an accurate reading. It is best to test the pH in the mud of a saturated media extract or in leachate collected by the pour through method.  

Avoid pH meters that do not require or cannot be calibrated. Inaccurate pH readings are problematic because any corrective measures that are implemented as a result of the inaccurate pH may cause nutrition problems and crop damage. The best meters are those with glass probes that are stored wet and have at least a two-point calibration.

5. Occasionally, when opening the growing media packaging, mold can be seen growing on the medium surface. No need to panic. These molds are saprophytic, meaning they live off of dead plant material such as bark, compost, peat moss or coir. They occur more frequently on composted components such as bark. They do not harm plants. These molds often require high humidity and stagnant air to survive. Typical greenhouse environments and nurseries are generally too dry and have high airflow, so these molds rarely come back.
6. In rare cases, offensive odors can come from the growing media. This is especially true for bulk products that have been sitting for a while and products sealed in plastic packaging. It generally does not occur in all packages within a shipment. The odors are from by-products of anaerobic microorganisms naturally found in the organic component of the growing media, such as bark or peat moss. When the package is opened and oxygen is introduced, odors tend to dissipate within a few days. The presence of oxygen shuts down anaerobic microorganisms, so they no longer produce odor-causing by-products and the odors do not come back. Any by-products causing the odor evaporate easily and leach when the growing media is watered.

7. Using the wrong media can cause uneven growth. Crops sometimes grow unevenly in areas where taller plants are next to short plants. When this can be seen throughout the entire crop, it creates a wavy appearance. The cause is often a lack of fertilizer application. Nutritional stress affects each plant differently within a crop. Some plants are a little stronger and continue to grow, even with low nutrient levels, while others are weaker and stop growing. The easy solution is to apply the appropriate fertilizer at the recommended rate. Verify that the correct amount of fertilizer is added to the stock tank and that the injector is working properly.

Uneven growth could also be caused by variation in the size of growing media components from one container to the next. Either the unused growing media was manufactured this way or it was caused by excessive fluffing with a bale breaker or soil mixer.

8. Change your mix if your growing media does not dry out. The growing media slowly dries out early in the crop cycle when the weather is cool and the plants are small. If this is a recurring problem, consider a high-porosity or bark-based growing media that dries out more rapidly.

Increased airflow through the plant canopy can also help. Achieve this result by installing horizontal airflow fans. This will move stagnant, humid air out of the plant canopy and replace it with drier air found above the canopy. Avoid growing plants on the ground and place them on benches where the air is warmer and airflow is better. If possible, reduce the number of hanging baskets above the crop. These baskets shade the crop and produce more humidity.

If plants are watered with clear water and followed up with another clear watering, crop nutrition can be a contributing factor. If the growing media is fresh, the starter fertilizer charge will last about one to two weeks. If it is aged, the starter fertilizer charge is a reduced rate. As a result, the plants do not have access to the nutrients required to maintain active growth. The plant just sits there, does not use the water and is susceptible to overwatering and attack by root-rot pathogens. To avoid this, water plants with a weak solution of water-soluble fertilizer.

9. Algae may form on the top of the growing media. Algae can come from a number of sources, but the most common source is the irrigation water. Surface water sources, such as ponds, lakes or rivers, have the highest concentration of algae, but even sources from wells and municipalities contain algae.  

Algae needs light, nitrogen and water to grow. You cannot take away light and nitrogen, as this compromises crop quality, but you can limit the time that the growing media surface stays wet. Algae growth can be discouraged by allowing the growing media surface to dry out between waterings. Other controls include selecting a growing media that dries out more rapidly or completing surface drenches with peroxide-based pesticides.

10. Every greenhouse operation has a certain population of weeds that end up in a crop, but sometimes there are a lot of them. Growers often blame the growing media, but sphagnum peat moss has few, if any, possible weed seeds.

Consider the environment in which it grows. Peat bogs are aquatic, very acidic and have low plant-nutrient content. Weeds do not grow in these conditions. Generally weeds originate inside or around the greenhouse. Weeds produce seed in the summer and fall when houses are open or weeds are allowed to grow under benches. The weed seeds can settle on potting benches, fan jet tubes, vents, exhaust fans, benches, etc. If supplies are stored outside, weed seeds can adhere or blow into containers and growing media packaging.

To keep weeds from getting into future crops, make sure to remove all weeds growing around the greenhouse property. This keeps them from going to seed. Remove any weeds that sprout inside the greenhouse, whether they are under the bench or in the crop. Keep the greenhouses clean, and weed issues in the crop will be reduced or eliminated.

Once in use, be sure to periodically test growing media, plant tissue, water and nutrient solution. You can test pH and EC of growing media, water and nutrient solution with your own testing equipment or send it to an independent laboratory for a more comprehensive analysis. If you have questions about growing media, consult the manufacturer to confirm you are well informed about the product’s specifications, intended use and expected results. Manufacturers can assist and provide technical support to ensure the best growing experience.

Leave a Reply

More From Media...
Bee Vectoring Technology Bumblebee

December 1, 2015

New Crop Protection Solution Uses Bees To Deliver Biocontrols To Flowering Crops

The new system from Bee Vectoring Technology incorporated a powdered crop protection material into the lid of commercial bumblebee hives. Bees pick up the product when they leave the hive and deposit it on every plant they visit.

Read More
Smith Gardens Marysville outdoor field production

November 30, 2015

Why Smith Gardens’ Marysville, WA, Facility Is A Great Place To Work

Labor rates in Washington State are some of the highest in the nation, making competition for labor fierce. This is why Smith Gardens in Marysville, WA, wants to strengthen its reputation as a great place to work.

Read More
Feature - Agave ‘Blue Waves’ (Rancho Tissue Technologies)

November 30, 2015

Spice Up The Garden With 12 New Succulent And Miniature Plant Varieties

New succulents and miniature plants for 2016 offer a variety of colors and foliage textures that add interest and visual appeal to any size garden — indoors or out.

Read More
Latest Stories
Stockosorb Crystals_with water Agriculture leaf (Evonick)

November 21, 2015

9 Sustainable Growing Media Products For Superior Green…

Manufacturers are delivering new growing media products to help growers attempt to minimize their footprint without sacrificing quality. Here are nine new products to consider for your greenhouse operation.

Read More
PittMoss is an engineered fiber, comprised of recycled newspaper and other natural materials, that has been processed to better hold air and water while delivering nutrients to the plant

November 12, 2015

The Latest Advancements In Growing Media And Soils

From increased automation to new soil amendments and water-saving technologies, media manufacturers offer sustainability-focused solutions to meet growers’ unique needs.

Read More

September 25, 2015

Canadian Sphagnum Peat Moss Association Announces Early…

According to an August 31 survey of members of the Canadian Sphagnum Peat Moss Association (CSPMA), whose members represent approximately 95 percent of all North American peat production, the peat harvest season has been adequate, but not strong, and could cause shortages and potentially higher transportation costs. Down To The Dirty Details The survey inquired about the status of CSPMA members’ 2015 Actual Harvest (including an estimate of what can be expected to be harvested for the remainder of the season) as a percentage of their 2015 Expected Harvest. The lack of a strong harvest overall may challenge peat availability. The Prairie Provinces (Manitoba 98 percent, Saskatchewan 88 percent and Alberta 94 percent), experienced early favorable weather conditions and a strong start to the year. This helped to minimize periodic, negative, weather-related conditions during the balance of the harvest season, and the harvest numbers are close to achieving the expected amounts. […]

Read More
Bob’s Market and Greenhouses’ Ron Morris pours Stockosorb into the hopper for distribution on the conveyor line

August 13, 2015

How Bob’s Market And Greenhouses Improved Growing…

My father started our company 45 years ago growing bedding plants, mainly early season production and finished plants for our West Virginia market. It was in the early 1980s that we started growing earlier spring production and shipping materials to southern markets, and by the late 1980s, we also produced pansies for fall. We started using hydrogels when they first came on the market in the early 1990s and found that they really helped with our production by keeping plants healthier for these new markets. Over the years, we’ve grown to be a large young plant producer and have a sizable business growing finished plants in cell packs, 4 1/2-inch pots, 6-inch pots, gallon containers, hanging baskets, multiple sizes of large containers and large baskets for municipal use. Creating The Ideal Soil Mix With our old system, it took several workers to mix pre-made soil with slow-release fertilizers in cement […]

Read More

December 2, 2014

Grow-Tech Announces BioStrate, Its Newest Hydroponic Gr…

Grow-Tech LLC recently announced the release of BioStrate Felt, a biobased textile specifically engineered for the growing of hydroponic microgreens and baby salad greens.

Read More

November 18, 2014

7 New Media And Light Products For Greenhouse Productio…

New media and light products cover a broad sweep of growing conditions.

Read More
Oakland Nursery plantings in Columbus_featured

November 17, 2014

Oakland Nursery Simplifies Streetscape Plantings And Ma…

The outdoor decorative containers that Oakland Nursery plants and maintains in downtown Columbus, Ohio, enhance the look of the city’s buildings and streets and hinder vandalism.

Read More

October 27, 2014

Peat Moss May Be In Short Supply This Year

Adverse weather conditions in Canada have played havoc with the peat moss harvest.

Read More

September 24, 2014

Canadian Harvest Of Peat Moss Is Below Average For 2014

The harvest season has been challenging, according to the Canadian Sphagnum Peat Moss Association (CSPMA), with lower-than-expected harvest of peat moss across most production regions in Canada, due primarily to adverse weather conditions across the country.

Read More

July 23, 2014

Liming Requirements And pH Modification For Pine Wood C…

In the last of a four-article series highlighting the production and use of pine wood chips as aggregates in greenhouse substrates, the researchers found growers do not need to adjust their production practices when 20 percent pine wood chips are used as a perlite replacement.

Read More

May 14, 2014

How Pine Wood Chips In Substrates Affect Plant Growth R…

This is the second article of the four article series highlighting the production and use of pine wood chips as aggregates in greenhouse substrates.

Read More

April 3, 2014

The Processing And Properties Of Pine Wood Chips

In the first of a four article series highlighting the use of pine wood chips as alternative aggregates to perlite in greenhouse substrates, researchers from North Carolina State University discuss the processing and physical properties of pine wood chips.

Read More

April 3, 2014

Water And Media Are The Foundations Of Your Business: T…

Electrical conductivity (EC) and pH, as well as water alkalinity, have the biggest effects on nutrient availability. Learn how to keep track of them through three common methods for better monitoring in the greenhouse.

Read More
PlugEase from Acme Group

March 3, 2014

Acme Group Introduces PlugEase, A Line Of Recyclable Ag…

The Acme Group recently announced its new line of recyclable Agrifabrics and plant plug substrate, PlugEase. The products make recycling affordable for greenhouse growers, farmers and horticulturalists.

Read More
Emerald Coast Growers

February 26, 2014

Emerald Coast Growers Constructs New Soil Facility

Emerald Coast Growers has constructed a new, consolidated soil mixing facility to increase efficiency and allow for easier custom blending by crop.

Read More
Combination pH and EC meter. Photo courtesy of Hanna Instruments

February 5, 2014

Test Media pH And EC With The 2:1 Technique, Pour-Throu…

Avoid a buildup of soluble salts and create an environment most conducive to nutrient uptake with these three common media testing methods.

Read More
Fertiss Growing Medium from Oasis Grower Solutions

November 18, 2013

Three New Options For Growing Media

From special blends to mycorrhizae, here are some new options for growth media.

Read More

November 14, 2013

Growing Media: To Mix Or Not To Mix

Thinking about making your own growing mixes to lower costs? There are many things to consider before taking the plunge.

Read More
[gravityform id="35" title="false" description="false"]