Tips On Automating Simple Greenhouse Tasks

Anything that has an on/off switch or some sort of electro-mechanical action can be automated. Wander off to your local hardware store, pick up some mechanical timers, and you can automate a simple system in an afternoon. Automation is valuable because it saves time, and builds consistent, predictable cycles that promote quality growing.

These days, both simple and sophisticated greenhouse automation is available to almost any grower with nearly any type of crop or budget. The cost of electronics has dropped steeply over the past decade. At the same time, software has become more powerful and sensors are vastly more sensitive.

The challenge becomes picking out the right solution from a wide range of sometimes complementary and conflicting solutions.

Dedicated Versus Integrated

Let’s start with types of automation controls. Generally speaking, they fall into two kinds of controls.

Dedicated controls manage only one system. A water timer on a hose is a dedicated system. So are the small computers you can attach to boilers or lighting systems or irrigation valves. They may be sophisticated electronic devices, but they manage only boilers (or heaters, fans, lights or whatever).

Integrated controls are usually small computer systems that manage more than one system. Their advantage is general management, alarming and reporting. They often watch for changes in the environment and they can react: send an eMail, open a valve, adjust EC/pH, fire up the heaters or complain about that dead unit in house 51 via smartphone. They provide tighter environmental controls. They are more expensive than dedicated controls, but they accomplish more as well.

Some growers work better with dedicated controls. Some growers really need integrated controls. You want to ask yourself this question early on because your first choices will affect almost all the decisions you make afterwards.

Set Your Scope

Simplicity is your friend, but you don’t want to draw your circle too tightly. Most growers want to learn only one system, so pick one that allows you to expand if needed.

For example, there was a New Jersey grower who needed a water management system, but the operation picked one that did not handle electro-conductivity or pH issues. As a result, managing water quality still required many footsteps throughout the day to check the water status. Also, if something failed, there was no alarming. Sometimes the grower would not discover the problem until damage began to appear in the crops. Had their control system supported those extra areas of controls, they would have avoided all that frustration.

Eight Prime Areas For Automation

Good automation controls exist for these general greenhouse categories. Many manufacturers offer good controls for their equipment. Integrated controls will combine several of these categories into a single cohesive system.

– Heating (boilers, unit heaters, hot water distribution)
– Cooling (ventilation, pad and fan, A/C)
– Humidity (fog, ventilation)
– Irrigation (valves and sensors)
– Airflow (fans and vents)
– Lighting (HID and LED)
– Water Conditioning (all sorts of QC)
– Thermal Regulation (shades and screens)

Three Rules For Better Automation

Good automation projects follow simple, basic rules in order to achieve success quickly and cleanly. It doesn’t matter whether you are automating one single valve, or if you are building out environmental controls for 50 zones. Do what the professionals do, and follow these simple rules-of-thumb:

1) Tackle Consistency First
Automation is all about repeatability. Pick a process, establish a path to success and repeat it. Your solution should reliably repeat itself, and you should be able to predict when and how it repeats.
Keep it simple. A good system that works is better than a great system that doesn’t work.

2) Refine Quality Next
Once you have a working system, improve it. A good system becomes a great system by enhancing a path to success that you understand. For example, you can refine system controls by replacing mechanical timers with soil sensors and thermostatic controls that give your system the actual feedback it needs to adjust itself for you.

3) Expand on Success
Don’t set and forget. A successful system is actually a framework that you can use to add other types of automation. Look closely at the techniques used in the automation. Once you are comfortable with one system, it can often be adapted to solve other, similar problems.

The Great Force Multiplier

Automation is the great force-multiplier in the green goods industry. It allows a small crew of people to produce more crops than a non-automated competitor. Take a look at the top growers in any metro market. The biggest producers not only learn automation, they master automation and use it to build revenue. Walk their houses and talk to their growers. You will see how central automation is to their success.

This is not a trend restricted to the high end of the market. Even small- and mid-size growers can use automation to build revenue. Even if just a few key systems can be automated, a smaller grower can introduce better consistency and a lower labor cost to grow their crops.

Topics:

Leave a Reply

More From Equipment...
Silver Bullet Heaters (Heat Star By Enerco) Feature

November 28, 2016

The Latest In Greenhouse Heating And Cooling Products

New developments in heating, cooling, ventilation, and humidity control technology are designed to help you manage your greenhouse environment more efficiently. Check out some of the latest offerings from leading manufacturers.

Read More
north-creek-nurseries-gutter-connected-greenhouse-feature

November 23, 2016

How Greenhouse Technology At North Creek Nurseries Expedites Lean Flow Production

The new structure is the latest step in a lean flow efficiency process designed to help the company cut waste, drive down shrink, and increase profits.

Read More
Sensaphone alarms system

November 21, 2016

Five Things To Consider Before Purchasing A Greenhouse Alarm

A greenhouse alarm can be the difference between you and a major catastrophe that results in crop losses. Before you make a purchase, take these factors into account.

Read More
Latest Stories
Silver Bullet Heaters (Heat Star By Enerco) Feature

November 28, 2016

The Latest In Greenhouse Heating And Cooling Products

New developments in heating, cooling, ventilation, and humidity control technology are designed to help you manage your greenhouse environment more efficiently. Check out some of the latest offerings from leading manufacturers.

Read More
north-creek-nurseries-gutter-connected-greenhouse-feature

November 23, 2016

How Greenhouse Technology At North Creek Nurseries Expe…

The new structure is the latest step in a lean flow efficiency process designed to help the company cut waste, drive down shrink, and increase profits.

Read More
Sensaphone alarms system

November 21, 2016

Five Things To Consider Before Purchasing A Greenhouse …

A greenhouse alarm can be the difference between you and a major catastrophe that results in crop losses. Before you make a purchase, take these factors into account.

Read More
LED lights used in greenhouse

November 4, 2016

Evaluating Greenhouse Supplemental Lighting For Young A…

Researchers at Purdue and Michigan State University compare young and finished plant production under LED toplighting and HPS lamps to determine which source is most effective.

Read More
greenpower-led-production-module-philips-lighting

October 18, 2016

Lighting Research Center Is Surveying Growers On Supple…

The Center, part of the Rensselaer Polytechnic Institute, is looking for commercial growers to participate in an online survey regarding supplemental greenhouse lighting.

Read More
Chemical hopper

October 3, 2016

New Soil Mix Technology Generates High-Precision Greenh…

Advancements in soil mixers help growers achieve the highest level of automation and efficiency to create the ideal growing media for every type of crop.

Read More
Floricultura Bench Pulling System

July 31, 2016

Automation Saves Labor And Space At Floricultura Pacifi…

This Salinas, CA, orchid grower brings plants to its workers through automation that saves valuable time and takes full advantage of available growing space.

Read More
Harvest Automation HV 100 Feature

May 27, 2016

Harvest Automation Robot Helps You Move Plants Without …

The Harvest Automation HV-100 robot units use lasers and sensors to handle some of the most labor-intensive tasks in the greenhouse.

Read More
HV-100 Robots (Harvest Automation)

May 3, 2016

Harvest Automation Makes Strong Commitment To Greenhous…

The company recently announced it is selling off its robotic warehouse automation business to focus more on providing robotic materials handling to the greenhouse, vegetable, and fruit markets.

Read More
Priva FS Reader

May 2, 2016

What’s New In Greenhouse Environmental Controls

Growers today are looking for systems that save energy, are easy to use, and can be accessed remotely. New products from leading manufacturers are designed to tap into these needs.

Read More
Sentinel In The Greenhouse Feature

April 13, 2016

Monitor Your Greenhouse Conditions Without A Web Connec…

The Sentinel system from Sensaphone provides 24/7 monitoring of temperatures, power outages, and other potential problems, in locations where connectivity is unavailable.

Read More
Philips LED Lunar Greenhouse

March 29, 2016

Philips Lighting And University Of Arizona Study Shows …

A collaboration between Philips And The University of Arizona found that using energy-efficient LED lighting in a prototype lunar greenhouse resulted in an increased amount of high-quality edible lettuce while dramatically improving operational efficiency and use of resources.

Read More
Priva Tomato Deleafing Robot

March 22, 2016

Priva Developing Deleafing Robot For Tomatoes

The deleafing robot, which is designed to mimic the performance of a human while being economically viable, will be tested and evaluated by Dutch growers later this year.

Read More

February 23, 2016

How Light Diffusion Works In The Greenhouse

Ken Aguilar of SolaWrap Films shares how light diffusion technology offers many benefits for greenhouse crops.

Read More

February 22, 2016

New Greenhouse Transplanters Offering More Versatility

New transplanters on the market offer flexibility in speed, plug tray compatibility, and functionality.

Read More

February 20, 2016

Hydrogel Technology Means Growers And Their Customers C…

Water and nutrient management are critical elements for quality plant production in the greenhouse. Maintaining the right amounts of available moisture and fertilizer at all times can be pretty labor intensive, but there are tools available to help you keep these inputs at optimum levels as efficiently as possible. Recently, we visited Evonik Industries’ North Carolina production plant for to see how one of these products — Stockosorb — is made, how it works, and learn the benefits of incorporating these tools in your own operation. Learn more about Evonik Industries’ Stockosorb hydrogel product on the Stockosorb website.  

Read More
Using cables in place of a solid belt, the Echo-Veyor design doesn’t cast shadows, so plants can be grown underneath

February 19, 2016

Echo-Veyor Has Made Plant Handling Easier For Greenhous…

Growers are creating improvements in a range of functions with customized plant handling systems. Several growers have realized efficiencies through customized conveyor solutions, by working with Cherry Creek Systems, based in Colorado Springs, CO, to install its Echo-Veyor cable-driven transport system. Designed to support multiple different tray types and pot sizes, each system is custom-designed for the individual needs of the operation. It can tie into existing posts or be built into a free-standing system.     The Echo-Veyor system has helped growers like Dallas Johnson Greenhouses and Rockwell Farms increase efficiency of product handling in a variety of functions, ultimately reducing time, labor, and labor costs, and improving job functions for employees working on spacing plants, pulling and processing orders, and shipping. Dallas Johnson Greenhouses in Council Bluffs, IA, reduced labor, saved time, improved its team’s performance, and saw improved plant quality at retail after installing its Echo-Veyor shipping […]

Read More
Metrolina Greenhouses keeps a 4-acre barn filled with wood chips, sourced locally from forestry waste and old pallets. The barn can hold a three- to four-week supply of wood chips

February 18, 2016

Metrolina Greenhouses Has Improved Heating Efficiency W…

Sustainability started to become a keyword in the horticulture industry in the late 2000s, when growers began converting their heating systems to greener options to save on energy costs and reduce their impact on the environment. However, there haven’t been many operations that have invested in sustainable solutions on as large of a scale as Metrolina Greenhouses at its Huntersville, NC, headquarters. Six years later, the operation is still fully committed to its biomass heating system and everything it entails.     Metrolina first fired up its Vynke biomass system from Belgium in 2010. The four wood boilers cover 95% of the operation’s heating needs at its 201-acre main location in Huntersville, NC, and Metrolina still maintains its traditional heating systems for back up and to provide flexibility of resources. Wood chips are sourced locally, with the majority from local forestry activities like wood harvesting companies and developers. The other […]

Read More
[gravityform id="35" title="false" description="false"]