Which Watering Method Is Best?

Which Watering Method Is Best?

What are the general rules of watering?

There are three main rules of watering.

– Use a well-drained substrate. When the root substrate is drained and aerated, proper watering can be achieved, giving the plant desirable texture and structure.

– Water thoroughly each time. It is important to water all of the substrate each time the water is applied so that the water reaches the roots and produces a healthy plant.

– Water before moisture stress occurs. You should water just before moisture stress occurs. The result is a properly aerated system as well as healthy root development. 

What types of watering systems are there?

There are several methods and ways to water plants. Generally they fall into the following categories: hand watering, sprinklers and mini-sprinklers, booms, sub-irrigation and drip. There are both closed and open systems.

What is a closed system?

A closed irrigation system is any method for growing plants in which the nutrient solution is recirculated. Nutrients are not allowed to leach into the ground. 

What is an open system?

An open irrigation system is any system for growing plants in which nutrient solution is allowed to pass through the root zone and out into the environment. 

Why is hand watering not economical?

Hand watering is considered uneconomical because it is labor inefficient, and automated systems are relatively inexpensive. Further, this task is often left to the least skilled laborers, and the economic impact of careless watering on the quality of the plants can quickly be re-paid by most automated systems. 

What are the different watering systems for cut flowers?

The different types of fresh-flower watering systems are perimeter watering and thin wall dripperline, often called tapes. Perimeter watering is a plastic pipe around the perimeter of a bench with nozzles that spray water over the substrate surface below the foliage. The thin wall dripperline system is popular because long lengths of bench can be handled from a single header, and the humidity of the canopy is reduced, decreasing the incidence of disease. They are both typically open systems. Bag culture of cut flowers is usually watered by drippers or spray stakes. 

What types of containerized-plant watering systems can be used in a greenhouse?

Containerized-plant watering systems include drip, overhead sprinklers, boom watering, flood and float systems and pulse watering. 

How does drip watering work?

Drip watering is a standard open system used when automatically watering potted plants. The water is carried to each pot by a thin tube available in various sizes. The most modern systems utilize a dripper, or even a pressure compensating dripper to assure each plant receives the same amount of water. It is quite possible, in a well-designed system, to achieve uniformities of 95 percent. 

What does overhead sprinkling do?

Overhead sprinklers are used mainly for crops that tolerate wet foliage. Pipes are installed above the plants and nozzles with varying spray ranges are installed to cover all plants. The best measure of a sprinkler system is a mathematical evaluation called Distribution Uniformity (DU). For crops highly dependent on uniform watering, like plugs, a DU of 85 percent or better should be used. For less critical applications, like woody ornamentals in large containers, a DU of 75 to 80 percent can be acceptable. 

Should I use boom watering?

Boom watering can function as either a closed or an open system that is used for producing seedlings grown in plug trays. This enables each seedling to grow in an individual cell when watering precision is extremely important. The boom extends from one side of the greenhouse bay to the other, propelled by an electric motor. 

What is mat watering?

The mat watering system is a closed system. Potted plants are planed on a constantly moist mat that soaks up the nutrients through capillaries. All pots may be placed on a mat and no adjustment is needed when changing pot size. 

How does a basic flood system operate?

A flood system pumps water or fertilizer into a bench, trough or floor long enough to reach the plant capillaries. The water/fertilizer is then drained and the whole process is repeated after a given amount of time. 

How do I grow crops using a float system?

In a float system, seedlings are grown on trays that float on a nutrient solution. After a determined amount of time, fertilizer is added until seeds form. The seeds then float on the solution in the trays and water is added when needed, allowing the crops to grow. 

What are the benefits of pulse watering?

Pulse watering is an open system that is used in order to save water from being over-consumed. Water or fertilizer is applied several times during a drying cycle instead of just once at the end of the cycle. However, less fertilizer is applied each time so the concentration is lower. 

When should water be tested?

The chemical balance in the water is crucial to the survival of the plant in the greenhouse. Anytime a new water source is established, it should be tested. During the first two years, you should test the water at least twice a year. It is best to test during a dry period and a wet period. After you have established a water quality pattern, the water needs to be tested every couple years. 

How do I conduct a soluble-salt test?

The soluble-salt test measures all electrically charged ions dissolved in water. The higher the salt content, the more electrical currents are flowing through the sample. Excessively high salt levels make the uptake of water and essential nutrients more difficult for plants, resulting in water stress, and chemical deficiencies and toxicities. 

What is alkalinity?

Alkalinity is a measure of carbonate amounts plus bicarbonate in water. Applying alkaline water is similar to applying limestone. An excessive alkalinity level results in an unacceptable rise in the pH of the substrate, which can lead to nutrient deficiencies. 

What does hardness measure?

Hardness is a measure of the calcium and magnesium content in water. These two elements should be balanced to prevent calcium or magnesium deficiencies. When there is high alkalinity in water, a hardness test should be done.

For more Helpful Hints and other NGMA publications, contact the organization at www.ngma.com or call 303-798-1338.

Leave a Reply

One comment on “Which Watering Method Is Best?

More From Equipment...
Floricultura Bench Pulling System

July 31, 2016

Automation Saves Labor And Space At Floricultura Pacific

This Salinas, CA, orchid grower brings plants to its workers through automation that saves valuable time and takes full advantage of available growing space.

Read More
Harvest Automation HV 100 Feature

May 27, 2016

Harvest Automation Robot Helps You Move Plants Without People

The Harvest Automation HV-100 robot units use lasers and sensors to handle some of the most labor-intensive tasks in the greenhouse.

Read More
HV-100 Robots (Harvest Automation)

May 3, 2016

Harvest Automation Makes Strong Commitment To Greenhouse Production Market

The company recently announced it is selling off its robotic warehouse automation business to focus more on providing robotic materials handling to the greenhouse, vegetable, and fruit markets.

Read More
Latest Stories
Floricultura Bench Pulling System

July 31, 2016

Automation Saves Labor And Space At Floricultura Pacifi…

This Salinas, CA, orchid grower brings plants to its workers through automation that saves valuable time and takes full advantage of available growing space.

Read More
Harvest Automation HV 100 Feature

May 27, 2016

Harvest Automation Robot Helps You Move Plants Without …

The Harvest Automation HV-100 robot units use lasers and sensors to handle some of the most labor-intensive tasks in the greenhouse.

Read More
HV-100 Robots (Harvest Automation)

May 3, 2016

Harvest Automation Makes Strong Commitment To Greenhous…

The company recently announced it is selling off its robotic warehouse automation business to focus more on providing robotic materials handling to the greenhouse, vegetable, and fruit markets.

Read More
Priva FS Reader

May 2, 2016

What’s New In Greenhouse Environmental Controls

Growers today are looking for systems that save energy, are easy to use, and can be accessed remotely. New products from leading manufacturers are designed to tap into these needs.

Read More
Sentinel In The Greenhouse Feature

April 13, 2016

Monitor Your Greenhouse Conditions Without A Web Connec…

The Sentinel system from Sensaphone provides 24/7 monitoring of temperatures, power outages, and other potential problems, in locations where connectivity is unavailable.

Read More
Philips LED Lunar Greenhouse

March 29, 2016

Philips Lighting And University Of Arizona Study Shows …

A collaboration between Philips And The University of Arizona found that using energy-efficient LED lighting in a prototype lunar greenhouse resulted in an increased amount of high-quality edible lettuce while dramatically improving operational efficiency and use of resources.

Read More
Priva Tomato Deleafing Robot

March 22, 2016

Priva Developing Deleafing Robot For Tomatoes

The deleafing robot, which is designed to mimic the performance of a human while being economically viable, will be tested and evaluated by Dutch growers later this year.

Read More

February 23, 2016

How Light Diffusion Works In The Greenhouse

Ken Aguilar of SolaWrap Films shares how light diffusion technology offers many benefits for greenhouse crops.

Read More

February 22, 2016

New Greenhouse Transplanters Offering More Versatility

New transplanters on the market offer flexibility in speed, plug tray compatibility, and functionality.

Read More

February 20, 2016

Hydrogel Technology Means Growers And Their Customers C…

Water and nutrient management are critical elements for quality plant production in the greenhouse. Maintaining the right amounts of available moisture and fertilizer at all times can be pretty labor intensive, but there are tools available to help you keep these inputs at optimum levels as efficiently as possible. Recently, we visited Evonik Industries’ North Carolina production plant for to see how one of these products — Stockosorb — is made, how it works, and learn the benefits of incorporating these tools in your own operation. Learn more about Evonik Industries’ Stockosorb hydrogel product on the Stockosorb website.  

Read More
Using cables in place of a solid belt, the Echo-Veyor design doesn’t cast shadows, so plants can be grown underneath

February 19, 2016

Echo-Veyor Has Made Plant Handling Easier For Greenhous…

Growers are creating improvements in a range of functions with customized plant handling systems. Several growers have realized efficiencies through customized conveyor solutions, by working with Cherry Creek Systems, based in Colorado Springs, CO, to install its Echo-Veyor cable-driven transport system. Designed to support multiple different tray types and pot sizes, each system is custom-designed for the individual needs of the operation. It can tie into existing posts or be built into a free-standing system.     The Echo-Veyor system has helped growers like Dallas Johnson Greenhouses and Rockwell Farms increase efficiency of product handling in a variety of functions, ultimately reducing time, labor, and labor costs, and improving job functions for employees working on spacing plants, pulling and processing orders, and shipping. Dallas Johnson Greenhouses in Council Bluffs, IA, reduced labor, saved time, improved its team’s performance, and saw improved plant quality at retail after installing its Echo-Veyor shipping […]

Read More
Metrolina Greenhouses keeps a 4-acre barn filled with wood chips, sourced locally from forestry waste and old pallets. The barn can hold a three- to four-week supply of wood chips

February 18, 2016

Metrolina Greenhouses Has Improved Heating Efficiency W…

Sustainability started to become a keyword in the horticulture industry in the late 2000s, when growers began converting their heating systems to greener options to save on energy costs and reduce their impact on the environment. However, there haven’t been many operations that have invested in sustainable solutions on as large of a scale as Metrolina Greenhouses at its Huntersville, NC, headquarters. Six years later, the operation is still fully committed to its biomass heating system and everything it entails.     Metrolina first fired up its Vynke biomass system from Belgium in 2010. The four wood boilers cover 95% of the operation’s heating needs at its 201-acre main location in Huntersville, NC, and Metrolina still maintains its traditional heating systems for back up and to provide flexibility of resources. Wood chips are sourced locally, with the majority from local forestry activities like wood harvesting companies and developers. The other […]

Read More

January 19, 2016

Tips For Cherry-Picking The Right LED Lighting Solution…

If you want to find the right LED lighting solution for your greenhouse, start with these tips from top lighting manufacturers.

Read More
Feature Image Cob 700 (NewLux)

November 28, 2015

15 LED Lighting Solutions For Your Greenhouse

Narrowing in on the right LED lighting product often comes down to considering your specific crop needs and growing requirements to see what works best for your application. Here are 15 LED products to take into account when choosing the right fit for your greenhouse.

Read More

October 27, 2015

How Dallas Johnson Greenhouses Is Simplifying Shipping

Two years ago, Dallas Johnson Greenhouses, a 61-acre operation in Council Bluffs, Iowa, and No. 21 of Greenhouse Grower’s Top 100 Growers, was struggling to get its orders out. With its range of potted annuals, there were so many skus that it was impossible to get enough carts into the shipping greenhouse, and the crew couldn’t get orders processed fast enough. As a result, the operation was consistently pulling orders until midnight every night during the busy shipping season, says President and CEO Todd Johnson. So Johnson got together with Arie Van Wingerden at Cherry Creek Systems to discuss his problem, and what they came up with has changed everything, Johnson says. Inside one of Dallas Johnson Greenhouses’ existing structures, the team installed a shipping system made with Echo-Veyors, the popular cable conveyor system designed by Cherry Creek Systems. The system was placed right in the front of the greenhouse, […]

Read More
Tidal Creek Growers

October 24, 2015

Five Tips For Successful Use Of Boom Irrigation Lightin…

Michigan State University Extension shares five tips to help growers use boom irrigation lighting more effectively to accelerate flowering of long-day ornamental crops.

Read More

October 8, 2015

Industry Standards For Greenhouse Lighting On The Horiz…

As the use of LEDs has risen among greenhouse growers, so have concerns about the best way to measure and compare the many LED light products across the market. As a result, the lighting industry is responding to a call for greater transparency and the development of standardized measuring and testing methods.

Read More

September 28, 2015

11 Products For Precision Greenhouse Growing

These new options in equipment, automation, structures, lighting and software are designed to help growers run their operations with efficiency and accuracy and at a lower cost.

Read More
[gravityform id="35" title="false" description="false"]