NGMA: The Next Generation

NGMA: The Next Generation

Fifty years makes a huge difference in the evolution of greenhouse architecture. From lean-tos and quonsets to gutter-connected, retractable-roof structures, commercial greenhouses have gained much from advances in technology. With more modern greenhouses have come advancements in the “furniture” to fill them, also known as greenhouse equipment and supplies, as well as innovative plastic films, which have revolutionized greenhouse shapes and framing systems. The growth of commercial floriculture and greenhouse vegetables over the years has fueled demand for greenhouse technology, and new manufacturers have emerged, raising competition and quality standards.

All of this innovation needed organization–enter the National Greenhouse Manufacturers Association (NGMA). Founded in 1958, NGMA represents 65 member companies–27 component, 14 structural and nine service. These include greenhouse manufacturers, equipment manufacturers and suppliers, as well as researchers, students, growers and other allied trades serving the international horticulture industry.

Retrofitting Itself

Today, NGMA is working to promote and defend greenhouse construction code standards and the agricultural classification as the changing landscape becomes increasingly commercialized, says Alec Mackenzie of Argus Control Systems, who serves on NGMA’s Board of Directors as secretary, on behalf of the board. With the help of its new executive director, Denise Calabrese (see “Under New Management”), the organization is committed to raising its industry profile, gaining new members and providing additional services as it moves forward and adapts to the changing international business dynamic.

“The new executive director will facilitate existing NGMA activities and we hope to significantly improve our visibility and usefulness to our industry,” Mackenzie says. “We would like to expand NGMA’s scope to more broadly serve the capital investment side of protected horticulture and promote technologies that will improve the horticultural industry.”

The rest of the Board of Directors includes: Rich Reilly of Rough Brothers, Inc., president; Scott Thompson of X.S. Smith, vice president; Steve Woods of Hortica, treasurer; Rich Perkins of Perkins Communication, service division; Brian Munchel of Ludy Greenhouses, structural division; Tom Piini of Micro Grow and Peter Stuyt of Ridder USA, component division.

NGMA Speaking Out

One of the biggest improvements NGMA has made is in gaining a bigger voice on industry legislative issues. Last October marked the organization’s first-ever event on Capitol Hill, aimed at helping its members connect with legislators and promote the horticulture industry. With high-stakes issues such as comprehensive immigration reform at the forefront of national news, NGMA leaders recognize the need for grassroots action.

“We are reaching out to other industry groups to build a stronger industry voice,” Mackenzie says. The most pressing issues the industry is facing today, according to NGMA, are:

– Labor supply and cost

– Energy costs

– Price pressure and narrowing margins, particularly with big box retailers

– Crop diseases that may close some production areas to shipping

– Zoning problems and permit delays

– Regional code anomalies (fire, building, electrical, etc.)

– Regional property tax interpretations (greenhouses are not classified as agricultural)

NGMA leaders say they are concerned about the consequences to U.S. growers if these issues are not addressed and solved in the coming years. The diverging and changing market structure demands immediate attention to areas such as an increase in greenhouse vegetable production and increasing competition from foreign companies, Mackenzie says.

“These issues will cause the continued decline of the mid-sized grower, rising input prices and falling margins, and an overall loss in the market,” Mackenzie says. “They could also contribute to the success of the small niche grower and very large, well-run wholesale growers.”

NGMA Survey 2006

In calendar year 2005, NGMA members reported: 

Total gross revenue from all sources: $134,680,091
Gross revenue from new construction: $102,016,991
Gross revenue from exports: $2,100,124
Total new greenhouse square footage: 18,641,391
Gutter-connected or similar sq. footage: 10,348,427
Fixed shade structure sq. footage: 2,184,373
Open/moving roof structure sq. footage: 1,434,042
Average no. of people employed: 564
Total employee payroll: 23,142,450
Total sq. feet of glass purchased: 2,646,075

2007 And Beyond

From the beginning, NGMA has been instrumental in disseminating information to the industry by creating guides and standards for designing, purchasing and building structures, as well as maximizing energy efficiency, preventing greenhouse damage and reducing water run-off, among other topics (see “Helpful Hints, Irrigation”). NGMA also conducts an annual Commercial Greenhouse Manufacturing Industry Survey to assess the square footage of new greenhouses constructed each year by U.S. manufacturers, as well as gross revenues, employee payroll and other data. The organization wants to grow its image as an information resource with plans to strengthen the educational package available to its members, Mackenzie says.

“In its ‘2007 Work Plan,’ NGMA will develop a speakers’ bureau and a certification program,” he says. “NGMA will develop a working relationship and affiliation with other organizations, utilize academic members for information dissemination, ensure positive code modifications and changes that affect the industry, and advocate against issues that negatively affect members.”

Other goals NGMA has for the next 10 years include promoting an increase in systems integration; promoting automation and other labor-saving equipment; promoting energy-saving technologies; increasing industry knowledge through education; and improving liaison support for universities and government agencies such as the U.S. Department of Agriculture.

“NGMA is a small organization with limited exposure,” Mackenzie says. “Increased involvement and exposure is our constant objective. We are planning to coordinate better efforts with the trade press, conduct stronger promotional campaigns and gain additional support from NGMA members. Indirectly, NGMA can continue to serve the industry through encouraging cooperation and improvement at the greenhouse manufacturing and greenhouse equipment
supply level.”

Leave a Reply

More From Structures...

February 15, 2017

Growers Planning to Invest in Structures in 2017

Data from this year’s Greenhouse Grower State of the Industry survey indicates that growers are planning to make major investments in structures and facility upgrades this year.

Read More
NVAC Greenhouse prototype

February 15, 2017

New Greenhouse Cooling System in Development for Hot-Climate Regions

Researchers at McGill University in Quebec have developed an alternative evaporative cooling solution for greenhouses in warm climates, and are now seeking commercial partners.

Read More

February 15, 2017

Registration Open for NGMA Spring Meeting

The annual gathering of the National Greenhouse Manufacturers Association will feature a look at green industry trends, emerging market opportunities, and more.

Read More
Latest Stories

February 15, 2017

Growers Planning to Invest in Structures in 2017

Data from this year’s Greenhouse Grower State of the Industry survey indicates that growers are planning to make major investments in structures and facility upgrades this year.

Read More
NVAC Greenhouse prototype

February 15, 2017

New Greenhouse Cooling System in Development for Hot-Cl…

Researchers at McGill University in Quebec have developed an alternative evaporative cooling solution for greenhouses in warm climates, and are now seeking commercial partners.

Read More

February 15, 2017

Registration Open for NGMA Spring Meeting

The annual gathering of the National Greenhouse Manufacturers Association will feature a look at green industry trends, emerging market opportunities, and more.

Read More
EFTE Film

January 18, 2017

Looking at Glass or Polyethylene for Your New Structure…

Ethylene Tetrafluoroethylene, also known as EFTE, is a fluorine-based material that looks like a standard polyethylene greenhouse film but offers high light transmittance.

Read More
Nadia Sabeh, CEAC

January 18, 2017

Upcoming Seminars to Focus on Managing the Greenhouse E…

The seminars, which will also be accessible online, are presented by the University of Arizona’s Controlled Environment Agriculture Center.

Read More

November 16, 2016

Stay Up To Date On Greenhouse Structures And Materials

eGro, an online resource for greenhouse growers, features a series of video lectures and tutorials on a wide variety of topics, including greenhouse structures and terminology, heating and cooling, and more.

Read More
Dual Atrium Greenhouse (Nexus)

October 12, 2016

Gibraltar Industries Acquires Nexus Corporation

The building manufacturer and distributor strengthens its position in the U.S. greenhouse market, complementing its RBI greenhouse company with the aquisition of Nexus Corp.

Read More
Gotham Greens Atrium Style Greenhouse Chicago

September 14, 2016

How An Energy Audit Of Your Greenhouse Can Save You Mon…

Is your greenhouse utility bill getting you down? Consider an energy audit to evaluate potential energy savings.

Read More
JGS Structure at Vineland

September 14, 2016

Take A Virtual Tour Of Canada’s Vineland Greenhouse Tec…

The one-of-a-kind research greenhouse project was completed by JGS Limited and features 40,000 square feet of horticultural research space.

Read More
Stuppy Greenhouse Manufacturing's Rainbow Super Structure

September 14, 2016

NGMA Contributes Revisions And Updates To Building Code…

The revisions cover the definition of a greenhouse, improved efficiencies in making greenhouse code changes, and more.

Read More
GrowSpan Light Deprivation Greenhouse

August 25, 2016

New Light Deprivation Greenhouses Help With Light Manag…

The GrowSpan light deprivation greenhouse from Growers Supply is outfitted with a blackout system that provides growers with control over the light cycle.

Read More
Cannabis Structure

August 23, 2016

5 Factors To Consider In Your Cannabis Structure

Along with the size and specs of your greenhouse, it's also important to focus on ventilation, light deprivation, benching, irrigation, and odor control.

Read More
Nexus Dual Atrium at Lucas Greenhouses

August 15, 2016

6 Ways Greenhouse Suppliers Are Partnering With Produce…

Greenhouse and equipment manufacturers share how they work with growers to provide customized solutions.

Read More
Cannabis Structure

July 28, 2016

How To Maximize The Efficiency Of Your Cannabis Structu…

The up-front costs of creating your cannabis facility may be high, but at least one expert says making the investment now will be well worth it down the road.

Read More
Floral Greenhouse at Vineland Research Centre

July 20, 2016

Research And Commercialization Unite At The New Vinelan…

The new, pre-scale commercial greenhouse facility at Vineland Research and Innovation Centre in Vineland Station, ON, will help accelerate the commercialization of innovative technologies and products coming out of research.

Read More
Geranium Injured By Ethylene

July 20, 2016

How To Prevent Greenhouse Heating Leaks

Ethylene from malfunctioning greenhouse heaters can lead to crop injury, while carbon monoxide can lead to worker illness. Know the symptoms and how to check greenhouse heaters to avoid these concerns.

Read More
GrowSpan Screen cap

July 18, 2016

Growers Supply Launches GrowSpan Website With New Conte…

The GrowSpan website will encompass the brand’s entire greenhouse structure line, and allows growers to quickly browse GrowSpan’s product offerings based on structure type.

Read More
Lisa Ruggiers, National Greenhouse Manufacturers Association

June 15, 2016

Meet The New Executive Director Of The National Greenho…

Lisa Ruggiers has been active in NGMA for several years, and will work closely with the group’s officers and board of directors.

Read More