Getting The Most From Your Fungicides Part 3: Diagnosis & Application

Slideshow: Getting The Most From Your Fungicides

Are you still guessing which products to use on a disease? Are you even sure you are treating diseases and not environmental, nutritional or even phytotoxicity look-a-likes? I have spent years trying to convince growers they can actually save money if they work with a lab to make sure what they think is a disease and which one it is.

In this article I will, hopefully, get you to think more about using a rifle approach to disease control and not the popular shotgun approach. It can save you a lot of money if you use only the best product for the actual problem at hand.

Getting Started

The first step is always to know what the actual problem is. A lab diagnosis is the best way to determine the problem you are facing. This must be done before the fungicide program is chosen. This time, I will attempt to show you why making the wrong choice will cost you money.

In Table 1, I give an example of a leaf spot, various fungicides and the results you can expect to see. You might think it’s easy to tell the difference between bacterial leaf spot, downy mildew and virus, but I assure you people who do not make a living at diagnosis often confuse symptoms. I have chosen a broad-spectrum product (copper) that can give moderate control of many foliar diseases. It is always the most effective in controlling bacterial leaf spots (Pseudomonas and Xanthomonas) but will not work on a virus disease.

I have included a very narrow spectrum product that works really well on downy mildew (Stature SC) versus a strobilurin (such as Heritage, Compass O or Insignia) that is broader in spectrum. So, choosing poorly based on failure to get a diagnosis can lead to applying a fungicide on a virus disease. Nothing good would come of it, and you would be paying for a pointless application that might even cause damage to the crop and result in further quality loss.

Second, do you know what the strengths and weaknesses of your fungicides are? Using broad-spectrum fungicides, like copper or mancozeb, all the time would certainly give you some control of most diseases. On the other hand, you will be spraying more often and getting less control overall for your costs than if you chose the best product for a specific disease. You would be unlikely to stop disease from developing but perhaps would slow it down. In these times of shrinking margins and the ongoing importance of sustainability, using the best fungicide you can afford for a specific problem is one way to save money.

Chase Horticultural Research publishes results of its fungicide control trials every couple years in a wall chart. We hope this has helped clarify which products work best on specific diseases. The current chart has been printed courtesy of Syngenta. Some of the most commonly used fungicides belong to one of the following chemical classes: sterol inhibitors, strobilurins, coppers and phosphonates. Table 2 lists the class, active ingredient, some of the specific products in each class and some of the best pathogen targets for that product or class. You should see that not all products work equally on all diseases.

Proper Application

Third, it is critical that you apply the fungicide to the correct site. If you have a root disease, you should apply the product to the roots. If you have a foliar disease, it is always best to apply the fungicide to the leaves. There are very few exceptions to this rule. There are some products with systemic characteristics, such as phosphonates, some strobilurins (Heritage) and thiophanate methyl (3336 and OHP 6672). Phosphonates are systemic in both directions while the others mentioned are systemic upwardly only. That is, you can apply them to roots and they will move through the xylem into the stems and leaves. The key is to understand that many times, they will not move in a quantity sufficient to control the disease. For the purposes of achieving optimal control, you should always apply the product to the site of the disease.

Another aspect of applying the product to the right site is to understand when you can direct the product to the upper leaf surface, the lower leaf surface, the crowns or the roots (see Table 3). Unlike many insects and mites, the fungi and bacteria do not move around the leaf surface, and you must contact them directly to achieve any real control.

In addition, these are not hard-and-fast rules. Some soil-borne pathogens are often in the crown area but can also cause root rot. If you check roots and they look good, you can concentrate applications for those listed in the “crown” row with a sprench or crown application. In contrast, root diseases caused by Pythium or Thielaviopsis (the cause of black root rot) are nearly always best controlled with a drench that contacts the entire root system.

Takeaways

Try to follow these steps to obtain the most effective disease control as often as possible.

1. Know the most common diseases that attack your crops and what they look like.

2. Know which chemical classes work best on the pathogen. Pick two or three to rotate.

3. Pick the specific product in each class by labeling on your crop, safety to your crop, REI, cost or availability in your state.

4. Try to apply the product to the best site. Use foliar sprays for foliar diseases and drenches for root rot.

5. Finally, keep good records. If you try to remember which fungicide you used from one season to the next, you will have a tough time. Make notes somewhere on the results of your efforts. As the saying goes: If you forget history you are doomed to repeat it. 

Leave a Reply

More From Disease Control...

March 2, 2015

Avoid Surprises On The Delivery Dock

A call in advance about problems with a plant shipment to a retailer you supply goes a long way toward customer satisfaction.

Read More
Janeen Wright

March 2, 2015

Deliver Plant Quality That Trumps Price [Opinion]

The industry's goal is to have loyal customers who return to the same plants time and time again, not because of price, but owing to a plant brand that shouts top-notch garden performance and is synonymous with excellence, which gives them the secure knowledge that their investment will be worth every hard-earned cent.

Read More
Heuch Pink Fizz_featured

March 2, 2015

Intergeneric Crosses Are A New Perennial Trend

Intergeneric crosses, oddities some botanists say are an impossibility, have made serious inroads in the perennial world.

Read More
Latest Stories
Rose Rosette on Knockout rose, May 2013. Photo credit: Alan Windham, University of Tennessee

March 2, 2015

Rose Rosette Disease Fight Gets A Boost From Government…

In 2014, $4.6 million was awarded through the Farm Bill to tackle rose rosette disease, a devastating pathogen that affects one of the industry’s most important crops.

Read More
Fig 1 Leafy Gall On Leucanthemum Becky

March 2, 2015

How To Prevent Leafy Gall Before You Lose Plants

Leafy gall is a nasty disease that can go undetected until plant damage is done. Take these steps to protect your crops from infection.

Read More

October 6, 2014

EPA Registration Granted To Stockton’s Timorex Go…

Timorex Gold, a broad spectrum fungicide, has received EPA registration in the U.S. for disease control on organic and conventional crops.

Read More

August 5, 2014

Prevention Measures For Impatiens Downy Mildew Start At…

Impatiens downy mildew is a fast-moving disease that can quickly go from bad to worse if conditions are right. In case you missed it, here are some of the highlights from Ann Chase's (Agricultural Consulting) downy mildew update at Cultivate'14.

Read More

July 22, 2014

Spray Coverage Key To Uniform Pest And Disease Control …

Greenhouse growers need to understand proper spray application coverage when applying pesticides and growth regulators to ensure successful treatment results.

Read More
Jeff Rich

July 18, 2014

Removing The Mask Of Phytophthora

Phytophthora is the number one disease of floriculture and nursery crops nationwide. Here are some effective measures growers can take to reduce the occurance of this pathogen, known as "the plant destroyer."

Read More

June 27, 2014

Biocontrols Can Be Highly Effective With Serious Commit…

Biocontrols can be very effective when the greenhouse operator makes a serious commitment to using them for integrated pest control. See how Parkway Gardens has successfully used biocontrols for the last nine years.

Read More

May 1, 2014

Be On The Lookout For Botrytis Blight

Greenhouse growers will be challenged by weather forecasts for cloudy and rainy conditions favoring Botrytis blight. Remembering cultural practices and correct fungicides will help until we get more sunshine.

Read More

April 18, 2014

Growth Products Introduces Improved Packaging For Compa…

Following the suggestion of a user of Companion Biological Fungicide, Growth Products has made improvements to the product's packaging to make it easier to handle and more durable.

Read More

April 8, 2014

Switching To Organic Fertilizer

Growers of short-term vegetable or ornamental crops should have an easier time switching from conventional mineral fertilizers to organic fertilizers.

Read More
Edema om Ivy Geranium. Photo credit: SHS Griffin

March 27, 2014

Geranium Leaf Spots: Is it Rust or Edema?

Damp conditions can lead to both rust and edema in geranium. Here's some advice on scouting and treating each.

Read More

March 21, 2014

Dümmen Clarifies Growers’ Options Regarding The K…

The Dümmen Group has released a statement to clarify growers' options regarding regulations the Kansas Department of Agriculture (KDA) placed on petunia cuttings sourced from Dümmen's Las Mercedes, El Salvador farm during weeks 51 through 7.

Read More
Impatiens downy mildew, Photo Credit: Ian Maguire, Biological Scientist, University of Florida

March 19, 2014

Impatiens walleriana Makes Possible Comeback In 2014 Se…

Despite efforts to thwart downy mildew, growers, researchers and landscape experts are predicting a continued impact on Impatiens walleriana supply issues for the 2014 season.

Read More

March 18, 2014

Exclusive: Kansas Department Of Agriculture’s Jef…

Greenhouse Grower talked to the Kansas Department of Agriculture’s Plant Protection and Weed Control Program Manager Jeff Vogel to learn about the Kansas Pest Freedom Standards and how the state is regulating tobacco mosaic virus (TMV) on petunias this season.

Read More

March 18, 2014

Kansas Department of Agriculture Taking Measures On Pet…

The Kansas Department of Agriculture (KDA) has ordered growers and retailers to destroy all petunias received from the Dümmen Group's Las Mercedes, El Salvador farm.

Read More
Leaf Distortion

March 18, 2014

Kansas Department of Agriculture BMPs For Scouting TMV …

The Kansas Department of Agriculture is asking growers and retailers to follow regulatory action and recommendations in scouting petunias for symptoms of tobacco mosaic virus (TMV).

Read More

March 13, 2014

Two BioSafe Systems Products Proven To Reduce Fusarium

In a recent study, SaniDate 12.0 and ZeroTol 2.0 from BioSafe Systems were evaluated as sanitizing products to control fusarium in irrigation water.

Read More

February 26, 2014

BioSafe’s OxiPhos And ZeroTol Are Effective For C…

A recent study has determined the effectiveness of OxiPhos and ZeroTol 2.0 in controlling impatiens downy mildew.

Read More