Do High Tunnels Make The Cut?

Zinnia ‘Benary Giant’ and Matthiola ‘Katz’ stock stems (left) were longer, with larger stem caliper, longer inflorescences and larger flowers than stems harvested from the field (right).

Increased consumer interest in farmers’ markets, buying local and sustainability make this an opportune time for domestic specialty cut flower growers. Local market advantages of specialty cut flowers exist, including product freshness, quality and availability of stems that do not ship well or are difficult to find.

Currently, an estimated 73 percent of cut flowers sold in the U.S. are imported. However, the number of domestically grown specialty cut flower stems sold has increased from 81 percent of total U.S. cut flowers produced in 2005 to 92 percent in 2010.

To compare high tunnel and field production of specialty cuts, one must consider flower quality and yield. Plant size and architecture are quality parameters of these crops, and they can be controlled culturally (i.e. fertility and growth regulators) and environmentally (i.e. temperature and light).

Flower size, number of flower buds, time to flower and stem length and strength can influence the quality, marketability and yield of cut flowers.

Although they don’t offer full control over environmental parameters, high-tunnels offer an option for specialty cut flower growers to overcome the high costs of greenhouse construction and production.

High Tunnels Grow Better Flowers

Cut flower yield per square foot was never higher for any of the cultivars tested in the field compared to the high tunnel. In fact, we harvested 23, 13, 172, and 178 more marketable Antirrhinum ‘Potomac,’ celosia, dianthus and zinnia stems from the high tunnel per 10 square feet respectively. Stems harvested from the high tunnel were significantly longer for Antirrhinum ‘Potomac’ and Antirrhinum ‘Rocket’, lisianthus, stock and zinnia. In terms of stem caliper, stock and zinnia were thicker. In this study, we used 12 inches as the minimum stem length for a stem to be considered marketable. Stock and zinnia stems had significantly larger stem caliper when grown in the high tunnel than the field, along with longer stem length. The combination of longer stem length and larger stem caliper for these two cultivars makes high tunnel production an advantage over field production when growing high-quality stems. On the other hand, although Antirrhinum ‘Potomac’ stems were longer when grown in the high tunnel, they consequently had smaller stem caliper. This combination led to problems supporting the stems in the high tunnel. The stems were too heavy and weak to be successfully supported by the mesh system we provided.

Cultivars Matter In High Tunnels

The results obtained from this study suggest that high tunnel production does offer several benefits over field production when growing high-quality specialty cut flowers. However, the specific benefits associated with high tunnel production are cultivar-specific. Seven of the cultivars selected for the study produced higher quality stems in the high tunnel compared with the field. For example, stems of Antirrhinum ‘Rocket’ grown in the high tunnel were longer with longer inflorescences than stems grown in the field, making them higher quality.

For Dianthus ‘Amazon Neon,’ high-tunnel production yielded more stems per square foot and reduced time to harvest, but flowers that were slightly smaller. Lisianthus ‘Mariachi’ stems harvested from the high tunnel were longer with larger flowers than stems harvested from the field, and therefore were higher quality. Helianthus ‘Sunrich Yellow’ stems produced in the high tunnel had notably larger flowers with less visible insect damage than stems grown in the field. Premier sunflower performed well in both field and high-tunnel environments, but time to harvest in the high tunnel was reduced. Zinnia ‘Benary Giant’ and Matthiola ‘Katz’ stock stems were higher quality in the high tunnel because they were longer with longer inflorescences and had larger stem caliper and flowers than stems from the field. In addition, more stems were harvested per square foot from the high tunnel than from the field, making zinnia a good choice for high tunnel production in the Midwest.

Leave a Reply

More From Structures...
Common Greenhouse Maintenance Problems GVZ Glasshouses

September 14, 2017

How to Deal With Common Greenhouse Maintenance Issues

The most common problems often come from a lack of cleanliness and faulty equipment. Here are a number of tips you can follow in each of these areas.

Read More
Youngs Greenhouse Space Growing Feature

August 14, 2017

How Young’s Plant Farm Invests in New Structures and Equipment

The Auburn, AL-based Top 100 Grower operation is improving its production infrastructure so it can continue to efficiently produce quality plants and keep up with demand.

Read More
CS3 Greenhouse (Stuppy)

June 4, 2017

7 Factors That Can Determine the Cost of Building a New Greenhouse

Want to know the main factors that determine the cost of building a new greenhouse? Phil Bishop of Stuppy has put together an overview of the expenses involved in this type of project.

Read More
Latest Stories
Common Greenhouse Maintenance Problems GVZ Glasshouses

September 14, 2017

How to Deal With Common Greenhouse Maintenance Issues

The most common problems often come from a lack of cleanliness and faulty equipment. Here are a number of tips you can follow in each of these areas.

Read More
Youngs Greenhouse Space Growing Feature

August 14, 2017

How Young’s Plant Farm Invests in New Structures and Eq…

The Auburn, AL-based Top 100 Grower operation is improving its production infrastructure so it can continue to efficiently produce quality plants and keep up with demand.

Read More
CS3 Greenhouse (Stuppy)

June 4, 2017

7 Factors That Can Determine the Cost of Building a New…

Want to know the main factors that determine the cost of building a new greenhouse? Phil Bishop of Stuppy has put together an overview of the expenses involved in this type of project.

Read More
Dallas Johnson Greenhouses

May 28, 2017

Growers Offer Advice on What to Know Before Your Next B…

Two Top 100 Growers discuss their most recent building projects, the challenges they addressed, and what they learned during the process.

Read More
GGS Cannabis Production

April 19, 2017

Suppliers Can Offer Technical Solutions for New Cannabi…

Here’s a look at how a few manufacturers have partnered with growers to make their transition into cannabis a smooth one, whether it’s through hands-on guidance or partnering with other industry leaders.

Read More
GrowSpan Series 1000 Greenhouse (GrowSpan) feature

March 24, 2017

New Greenhouse Structure Models Emphasize Crop Protecti…

Manufacturers of new structure models say they are responding to grower concerns with designs that focus on ventilation, maximizing your space, and incorporating a wide range of crops. Here’s a look at some of their latest offerings.

Read More
Brian Munchel

March 18, 2017

Brian Munchel of Ludy Greenhouse Manufacturing Dies at …

Munchel, a long-time member of the National Greenhouse Manufacturing Association, worked at Ludy Greenhouse Manufacturing for more than 30 years and was a computer-aided draftsman.

Read More
Nexus Atrium for Prides Corner

March 15, 2017

How Tech Suppliers Are Helping Growers Find Solutions

Greenhouse structures and components manufacturers highlight some of their most recent projects.

Read More

February 15, 2017

Growers Planning to Invest in Structures in 2017

Data from this year’s Greenhouse Grower State of the Industry survey indicates that growers are planning to make major investments in structures and facility upgrades this year.

Read More
NVAC Greenhouse prototype

February 15, 2017

New Greenhouse Cooling System in Development for Hot-Cl…

Researchers at McGill University in Quebec have developed an alternative evaporative cooling solution for greenhouses in warm climates, and are now seeking commercial partners.

Read More

February 15, 2017

Registration Open for NGMA Spring Meeting

The annual gathering of the National Greenhouse Manufacturers Association will feature a look at green industry trends, emerging market opportunities, and more.

Read More
EFTE Film

January 18, 2017

Looking at Glass or Polyethylene for Your New Structure…

Ethylene Tetrafluoroethylene, also known as EFTE, is a fluorine-based material that looks like a standard polyethylene greenhouse film but offers high light transmittance.

Read More
Nadia Sabeh, CEAC

January 18, 2017

Upcoming Seminars to Focus on Managing the Greenhouse E…

The seminars, which will also be accessible online, are presented by the University of Arizona’s Controlled Environment Agriculture Center.

Read More

November 16, 2016

Stay Up To Date On Greenhouse Structures And Materials

eGro, an online resource for greenhouse growers, features a series of video lectures and tutorials on a wide variety of topics, including greenhouse structures and terminology, heating and cooling, and more.

Read More
Dual Atrium Greenhouse (Nexus)

October 12, 2016

Gibraltar Industries Acquires Nexus Corporation

The building manufacturer and distributor strengthens its position in the U.S. greenhouse market, complementing its RBI greenhouse company with the aquisition of Nexus Corp.

Read More
Gotham Greens Atrium Style Greenhouse Chicago

September 14, 2016

How An Energy Audit Of Your Greenhouse Can Save You Mon…

Is your greenhouse utility bill getting you down? Consider an energy audit to evaluate potential energy savings.

Read More
JGS Structure at Vineland

September 14, 2016

Take A Virtual Tour Of Canada’s Vineland Greenhouse Tec…

The one-of-a-kind research greenhouse project was completed by JGS Limited and features 40,000 square feet of horticultural research space.

Read More
Stuppy Greenhouse Manufacturing's Rainbow Super Structure

September 14, 2016

NGMA Contributes Revisions And Updates To Building Code…

The revisions cover the definition of a greenhouse, improved efficiencies in making greenhouse code changes, and more.

Read More