Up Your Irrigation Game With The Right Filtration
Every type of irrigation system, including those used on vegetable farms, should always include some form of filtration, according to Aviv Vered, a Regional Sales Manager with Amiad Water Systems.
“It doesn’t matter if it’s drip, overhead, or even pivot irrigation,” Vered says, “you will have to use a filter to protect the entire system.”
Why? The industry calculates that every 10% decrease in distribution uniformity (DU) — the term used to define a system’s efficiency and performance — will result in 30% wasted water.
Vered, who presented on the topic at the annual Great Lakes EXPO, says the primary benefit of filtration is to protect the nozzle, but other parts of the irrigation system should be considered.
Mechanical Filtration
Vegetable growers need focus only on mechanical filtration, Vered believes, rather than the high-cost reverse osmosis (RO) systems that are typically used for drinking water. The three most common types of mechanical filtration are disc, screen, and media, while microfiber is rarely used.
“Each has pros and cons like anything else in life,” Vered says.
Historically, end-users largely used media filters consisting of various resins, carbon steel filters or chemical filters because that is what was sold 40 years ago, Vered says. “Is it bad? No.”
Today screen and disc filters are the more popular options, according to Vered. Screen filters are comprised of woven stainless-steel mesh, polypropylene, nylon, or polyester. Disc filters consist of a stack of grooved discs through which the water circulates.
RELATED CONTENT: Using Drones To Inspect Irrigation Systems
Choosing a Filter
Five questions should be answered during the filter selection process, Vered says:
1. What is the maximum flow available in terms of gallons per minute (GPM) or gallons per hour (GPH)?
“If it’s going to be 70 GPM, I probably don’t need more than a 2-inch filter,” Vered says. “If I’m going to use 300 or 500 GPM, then I will probably think about a 4-, 6-, or 8-inch filter or a filter that will have the capacity that holds so much water.”
2. What are the minimum and maximum operating pressures available in terms of pounds per square inch (PSI)?
“Not the pressure of the sprinkler; we’re talking about what pressure we’re getting out of the pump, out of the well,” he says.
3. What is the inlet size of the water line?
“The GPM goes back to the size of the piping we have,” Vered says.
4. What is the filtration requirement of the system?
“What are we protecting? The sprinkler? The drip tube? Or something smaller than that?” Vered says.
5. What debris is being filtered (sand, algae, sticks, leaves, plants, clams, mussels, etc.?
For more about micron vs. mesh as well as manual vs. automatic filtration, continue reading at GrowingProduce.com.
Subscribe to eNewsletter
