Understanding Plant Nutrition: High ph Problems

Slideshow: High pH Problems

High media-pH (above 6.4) induced iron deficiency is the most common nutritional problem for certain iron-inefficient crops (Figure 1), including calibrachoa, diascia, nemesia, pansy, petunia, scaevola, snapdragon and vinca. Plants only take up dissolved nutrients through their roots. When the media-pH is too high, micronutrients (especially iron) are less soluble and unavailable for uptake by plant roots. High-pH induced iron deficiency can develop within one to two weeks, resulting in chlorosis of new growth and overall stunting. This problem is not occurring because plants need more “feed” or are “heavy feeders.” Instead, it occurs because the iron supplied in fertilizer becomes insoluble due to the high media pH.

Getting Started

We have undertaken considerable research and worked closely with growers to develop strategies to rescue crops that are stressed from high media-pH. If you think there is a problem, the first thing to do is test the pH and electroconductivity (EC) of the growing medium (using a commercial or university lab, or your own recently calibrated meter). Checking the pH and EC will tell you whether the problem is nutritional, and also if it is caused by inadequate fertilizer concentration (EC) or a high media-pH.

Don’t forget to check roots. Root damage caused by overwatering, fungus gnats or root pathogens such as Pythium can give symptoms similar in appearance to high media-pH induced iron deficiency because the plant does not have healthy roots to take up nutrients from the growing medium (Figure 2). In that case, careful irrigation and a fungicide are required in order to grow a healthy root system.

When you’ve established that the media-pH is too high (above 6.4 for sensitive crops), consider the following steps. The first three steps can be combined in one application (high ammonium fertilizer with iron supplement, and water acidification if alkalinity is high) to help turn a crop around quickly. All of these steps can result in phytotoxicity, so trial on a small group of plants before applying to the entire crop.

1. Use a high-ammonium fertilizer. Check with your fertilizer supplier to select a high-ammonium, acid-reaction fertilizer (such as 21-7-7). The effect on media-pH can sometimes be slow (less than one to two weeks), especially in cool, wet conditions, or with small plants growing in large containers. Repeated applications of ammonium in cool, dark conditions may also cause toxic levels of ammonium to accumulate in leaf tissue. You may also see increased shoot growth with the high ammonium fertilizer, requiring additional growth regulator applications.

Concentration of this corrective fertilizer is important. We suggest 200 to 250 ppm for plugs and liners, and 300 to 400 ppm for finished plants as one- or two-time applications. Make sure media-EC is not already high, or you can run into salt damage of roots at those fertilizer rates.

2. Correct micronutrient deficiencies. Masking the symptoms of high pH with supplemental iron applications can be very effective for keeping plants alive and healthy when grown under high media-pH conditions. Unless your customers continue the iron sprays or drenches, or transplant the plants soon after receiving them, quality will suffer. When plants show chlorosis, send in a tissue analysis to test which nutrient is deficient. Although iron deficiency is most common, if a different nutrient (e.g. manganese) is limiting, then application of iron may worsen the problem because of antagonistic effects. While waiting for the lab test results, you could try an iron drench on a small group of test plants to check the response.

The recommended application rate for an iron drench is 5 ounces per 100 gallons of either Iron-EDDHA (several brands including Sprint 138 are available from many nursery suppliers), which provides 22.5 ppm iron, or Iron-DTPA (for example, Sprint 330), which provides 37.5 ppm iron). The letters EDDHA or DTPA are important because the iron form affects solubility at high pH (Figure 3). Iron forms decrease in solubility above pH 7 in the order from EDDHA (best) > DTPA > EDTA > sulfate (worst).

The solutions should be applied with generous leaching, followed immediately by washing of foliage to avoid leaf spotting. If there is no greening up of foliage after one week, these materials can be reapplied. All options are low cost, at less than 0.1 cents per 4-inch-diameter pot. We have found soil drenches are more effective than foliar sprays when iron deficiency is severe.

Do not apply iron chelate or iron sulfate drenches to iron-efficient plants, for example zonal and seed geranium, marigold or New Guinea impatiens. In addition, it is not recommended to drench iron into mixed containers that contain both iron-inefficient plants (i.e. petunias) and iron-efficient plants (i.e. geraniums) in the same basket.

3. Acidify your water to neutralize alkalinity. Alkalinity can be thought of as the “lime content” of the irrigation water and is different than the water pH. The alkalinity concentration can be determined by sending in a water sample to a laboratory. Low-cost alkalinity test kits are also available from laboratory suppliers such as Cole Palmer, Hach and Hanna.

If alkalinity in the irrigation water is above 80 ppm calcium carbonate (CaCO3) equivalents and media-pH is high, consider injecting acid in the irrigation water to bring water-pH down to 4.5 to 5.0. You can calculate the appropriate acid rate for your water source from the North Carolina State University website. For example, 2.8 fluid ounces of 35 percent sulfuric acid will neutralize 100 ppm CaCO3 of alkalinity in 100 gallons of irrigation water. Ensure that you follow safe handling practices when working with acid, and that your injector equipment can handle corrosive chemicals.

4. Consider an iron sulfate drench if pH is not coming down below 6. If uptake of ammonium is not lowering media-pH quickly enough (a realistic target is 0.5 pH units within a week), a drench of iron sulfate (also called ferrous sulfate or FeSO4) can be applied to lower media-pH within a day or two. Iron sulfate can be purchased from agricultural suppliers.

Iron sulfate is moderately acidic and has the benefit of adding iron (20.8 percent by weight). The material is highly soluble at water pH below 6.0, and it can be applied as a drench at 2 pounds/100 gallons (2.4 g/L). If iron sulfate is not washed off foliage immediately following a drench application, phytotoxicity is very likely. One week after the drench, leach the pot generously with clear water, followed by irrigation with a complete fertilizer solution to restore the nutrient balance.

Leave a Reply

2 comments on “Understanding Plant Nutrition: High ph Problems

  1. Very good display of deficiency and toxicity symptoms. I would greately appreciate if you could provide more photographs and related text with respect to phosphorus deficiency/ toxicity and low pH particularly in crop plants

  2. Very good display of deficiency and toxicity symptoms. I would greately appreciate if you could provide more photographs and related text with respect to phosphorus deficiency/ toxicity and low pH particularly in crop plants

More From Fertilization...

March 4, 2015

Second Annual GreenhouseConnect Will Bring Growers and Suppliers Together in San Diego This October

Following a successful inaugural event in Tampa last fall, Greenhouse Grower has announced the dates of its second annual GreenhouseConnect: October 26-29, 2015. Representatives of an expected two dozen leading greenhouse operations from across the U.S. will join senior-level suppliers at Rancho Bernardo Inn in San Diego for several days of one-on-one strategic meetings, a growers-only roundtable, informational sessions and a variety of networking events.

Read More
cultivate'15 logo

March 4, 2015

Cultivate’15: AmericanHort Announces What’s New

In an industry that has seen major changes occurring at a fast pace, many industry professionals leave Cultivate with their heads spinning and no clear idea of how to regroup and strategize. Cultivate’15 is “Changing the Game.” As this year’s focus, Changing the Game will call your attention to the ways in which our industry has changed and your opportunities to compete successfully.

Read More

March 4, 2015

California Spring Trials Preview: 32 New Perennials For 2016

Perennials are hot and if this preview of the 2015 California Spring Trials is any indication, there are going to be some great new perennial introductions for 2016. We contacted the breeders who will be displaying their new varieties in California in April, and they gave us a sneak peek. Check out the slideshow to see some of the new perennials making their debut to the trade this spring.

Read More
Latest Stories

January 9, 2015

6 New Fertilizer Products For Healthy Plants

These five products add even more options for delivering nutrients to the root zone.

Read More

January 7, 2015

Fertilizers And The Future

As growers look for new ways to cut costs and conserve resources, fertilizer and equipment companies are offering products that strive to save water, reduce toxic runoff and keep chemicals out of the equation.

Read More

December 31, 2014

Gain Greater Control Of Fertilizer With Automated Ferti…

University researchers look at integrating irrigation and fertilization with the help of water sensors to reduce fertilizer treatments and improve application timing.

Read More

October 30, 2014

Basics & Beyond: Comparing Substrate Fertilizer Ame…

Cornell University researcher determines if substrate-incorporated slow-release fertilizers can be used to replace or reduce the need for liquid fertilizer for four spring crops.

Read More

July 24, 2014

Using Controlled Release Fertilizers To Produce Garden …

Researchers determined whether or not garden mums can be grown with controlled-release fertilizer, and if it reduces fertilizer leaching, as compared with water-soluble fertilizers.

Read More

March 14, 2014

New Foliage Pro Fertilizer Offers Complete Nutrition Pl…

Dyna-Gro Nutrition Solutions has developed a process it says is capable of keeping all 16 essential plant nutrients in solution form.

Read More

January 30, 2014

OASIS Grower Solutions Introduces New One-Bag Hydroponi…

The new 16-4-17 Hydroponic Fertilizer from OASIS Grower Solutions (OGS) is a one-bag solution that replaces two-part systems traditionally used by commercial hydroponic growers. It is specifically formulated for commercial hydroponic production of lettuce, herbs and vegetables.

Read More

December 30, 2013

Fertilizer Changes Growing Mix pH

When considering a fertilizer's influence on media pH, you need to know its acid or basic reaction.

Read More

December 30, 2013

Basics & Beyond: Fundamentals Of Phosphorus Nutriti…

Phosphorus is an essential element, after all.

Read More
Everris Liquid S.T.E.M.

December 30, 2013

New Fertilizers For 2014

New fertilizer products not only deliver optimum nutrition, they also provide for easier application and increased efficiency. Check out these new products to help your operation produce a healthy crop in 2014. Click through on the pages below.

Read More

December 18, 2013

Focus On Fertilizer: Micronutrients And Organics

New fertilizer products are focusing on micronutrients and providing efficient options for organic production.

Read More

August 27, 2013

BioWorks Adds EcoVita To The Verdanta Family Of Biofert…

EcoVita, a homogeneous granular organic fertilizer, has been added to Bioworks Inc.’s Verdanta biofertilizers product family. This fertilizer will be manufactured and supplied to BioWorks by DCM Corporation of Belgium, a producer of natural and organic-based fertilizers in Western Europe. EcoVita is suitable for a wide variety of crops with its gentle release curve including:• Organic fertilization as a base nutrition in potting mixes• Leafy vegetables• Fruiting vegetables (s a top dressing) • Roses and other ornamentals The new fertilizer offers long-lasting and continuous action for 75 to 100 days and contains organic phosphorus (5 percent P2O5) for fast rooting. Nutrients in EcoVita are gradually released by the soil microbes, in addition to producing humus for better rooting and less leaching. EcoVita is OMRI Listed, making it suitable for use in organic production. “We’re pleased to introduce EcoVita 7-5-10 as our organic NPK product to complement our organic products: K-Vita 2-0-20 […]

Read More

April 29, 2013

Rockwell Farms Introduces Ready-To-Pour Container Ferti…

Rockwell Farms has introduced Rockwell Farms Plant Food, a bottled liquid fertilizer that does not need to be diluted before use. Always looking for ways to help the consumer succeeed, Jason Roseman of Rockwell Farms says the operation is also always looking for ways to get consumers to come back and buy more plants and flowers. “We feel like fertilization is one of those things that can be very confusing,” Roseman says. “Not everyone does it, and not everyone knows what they’re supposed to do.” The solution: Rockwell Farms Plant Food. The formulation is 150 ppm of a 20-10-20 fertilizer and is sold in 24-ounce bottles. Rockwell recommends that one bottle be used to fertilize 1.5- to 3-gallon outdoor plant and flower containers every 21 days. The product’s signage shows a young patio gardener pouring the bottled fertilizer on a windowbox with the tagline, “Just pour on your way out […]

Read More

April 29, 2013

Plant Products To Be Purchased By MGS Horticultural And…

MGS Horticultural Inc., a full-service supplier of fertilizers, pest control products, seeds and substrates in North America, together with Haifa Chemicals, a global supplier of potassium nitrate for agriculture and industry, specialty plant nutrients and food phosphates, today announced a plan to purchase Canadian fertilizer and pesticides supplier Plant Products Co. Ltd. The deal is anticipated to close by the end of June 2013. MGS will acquire Plant Products’ Canadian distribution business, sales force and name. MGS plans to use both names (MGS Horticultural and Plant Products) in all communications going forward. MGS will maintain locations in Leamington, ON; Brampton, ON; Laval, QC; St. Hyacinthe, QC; and Detroit, Mich. As part of the deal, MGS has signed multi-year agreements with Haifa to maintain exclusive distribution of Plant-Prod Soluble Fertilizers, Acer Controlled Release Fertilizer, Stim-Root and potting soil premix fertilizers for distribution in Saskatchewan, Manitoba and Eastern Canada. “MGS is excited […]

Read More

March 19, 2013

Irrigation And Fertilizer Tips For New Vegetable Grower…

Compared to other variable costs, fertilizers are not the largest part of the budget in conventional greenhouse production. Nevertheless, over the course of the season, mistakes in fertilizer use can lead to significant damages or crop losses. That makes this an important topic for ornamental growers who are experimenting with growing vegetable crops. This article will emphasize major differences between fertilizers used in vegetable production and in ornamentals production. The different nutrition strategies, monitoring and water volume per plant will also be explained. Fertilizer In ornamental production, nutrients are delivered using various water-soluble fertilizers through a fertilizer injector, through the use of controlled-release fertilizers, or a combination of the two. There are numerous fertilizer mixes available with all the needed nutrients already included. The fertilization rate is often given in parts per million (ppm) of nitrogen (N), which is a way of expressing the fertilizer concentration. At younger stages, plants will […]

Read More

March 11, 2013

Daniels Plant Food Rebranded As Nature’s Source

Ball DPF has announced the launch of Nature’s Source, a rebranding in name and packaging for its seed extract-based plant fertilizer product Daniels Plant Food. The new brand will make its industry debut at California Spring Trials. “While we are proud of our heritage, we made this bold decision because we’re expanding sales to our existing market segments and entering new ones. It was a good opportunity to start with a fresh name and a modern look for all our products and packaging,” says Chance Finch, general manager for Ball DPF. “We wanted to make it obvious, beginning with our Nature’s Source brand name, to know our products are sourced from nature. Growers, contractors and gardeners can be confident that our effective and unique formulations remain unchanged. We’re excited about launching updated packaging for all our products, and especially the new ready-to-spray plant food for home gardeners.” The Nature’s Source brand […]

Read More

March 6, 2013

Everris Introduces E-Max Release Technology Coating Che…

Everris has introduced its new E-Max Release Technology, a proprietary coating chemistry for use on a wide variety of nutrient components that are incorporated into controlled-release fertilizer products. According to Chris Buchheit, marketing manager for Everris’ ornamental horticulture products, E-Max will help Osmocote and the company’s other existing brands deliver even better performance and value. “This coating will aid in the development of products that both complement and enhance our Osmocote portfolio and other fertilizer lines. It will increase Everris’ flexibility to create customized nutrition programs designed for horticulture growers,” Buchheit says. E-Max Release Technology is a durable, cutting-edge, reacted polymer coating for use on a variety of essential macro- and micronutrients. Nutrients coated with E-Max Technology are produced to the same performance standards as Osmocote. It will allow for continued expansion of the Everris portfolio, the ability to further enhance nutritional values and an efficient use of a grower’s […]

Read More

February 4, 2013

BioSafe Systems And Daniels Plant Food Company Will Par…

BioSafe Systems has entered into a strategic partnership with Daniels Plant Food Company, a wholly owned subsidiary of Ball Horticulture Inc. BioSafe and Daniels have worked closely together for the past two years and will now look to further develop liquid plant food serving both the conventional and organic markets. In conjunction, BioSafe Systems will be introducing its own branded line of plant food products focusing on turf, landscape and agricultural markets. “Liquid plant food is a natural progression for our company” says Rob Larose, CEO of BioSafe Systems. “It fits perfectly into our current line of green and sustainable products, and we are excited about partnering with Daniels.” Daniels manufactures and markets both conventional and organic liquid fertilizers, using botanical extracts to provide high-value nutrition to plants. BioSafe Systems develops and markets effective and sustainable products to a wide variety of industries, including fruit and vegetable production, turf and […]

Read More